











BKT-4002-4003-l.1
BKT-4002-4003-l.1 is a decorative cellular PVC bracket with a long top arm that ends in a pointed tip, a curved brace and a small triangular opening in the upper corner. With equal projection and height, it is offered in five sizes from 18″ x 18″ to 42″ x 42″.
BKT-4002-4003-l.1 PVC Bracket
The classic bracket shape, a horizontal arm, a vertical leg and a curved brace between them, has been used for centuries to support eaves, porch roofs and canopies. It is so closely tied to traditional architecture that it remains a signature detail of classic homes from the Coastal U.S. to the Caribbean. BKT-4002-4003-l.1 brings this familiar form to the exterior in cellular PVC. Like most HB brackets it is non-structural, but it keeps the design and proportioning of a traditional wood bracket.
Square proportions, pointed tip
BKT-4002-4003-l.1 is as tall as it is deep, giving it a balanced, square outline. Its top arm runs well past the point where the curved brace meets it, and the end of the arm is cut to a point with angled faces. Below the arm, the brace sweeps down in a smooth arc to the wall leg, leaving a small triangular opening tucked into the upper corner. Where the brace meets the arm there is a small step, and the foot of the leg finishes with a short step above a squared base.
The extended, pointed arm gives the bracket a crisp, directional look, which works especially well under eaves and porch roofs where brackets are seen in a repeating row. For brackets with the same equal proportions but different outlines, compare BKT-3021-5-8-3 (open corner) or browse the full HB PVC brackets collection.
End profiles
Each HB bracket combines a main body with two end profiles. This product is listed with end profiles HP-CP at the arm and VP-4002-2.5 at the foot, and its SKU is BKT-4002-4003MHP-CPVP-4002-2.5. HB’s design tree includes thousands of main bodies and end profiles, so the HB team can advise on alternative end details.
Material, installation and finishing
BKT-4002-4003-l.1 is manufactured in cellular PVC using HB Elements’ patented process. It is installed with the cleat and adhesive supplied with it, and very little preparation is needed before painting. Painting is optional, although most HB brackets are painted to hide caulking and nail-hole filler and to match the trim. It is a decorative bracket and should not be used for structural support.
Ordering and sizing help
Email a PDF of your plans to info@hbelementsinc.com and call (954) 784-8216 so an HB representative can help you confirm size and end details. HB’s Brackets Spec Sheet shows the full size chart, the PVC brackets page has more designs, and the HB Elements video library covers installation.
| thickness-projection-height | 3″ x 18″ x 18″, 3″ x 24″ x 24″, 4″ x 30″ x 30″, 5″ x 36″ x 36″, 5″ x 42″ x 42″ |
|---|---|
| HP | HP-CP |
| VP | VP-4002-2.5 |
