BKT-4030-4240-C.0

BKT-4030-4240-C.0 is a heavy, decorative cellular PVC bracket with a solid triangular body, a straight diagonal front, a small triangular window, a deep step under the square arm tip and a foot that flares out in a concave curve. With equal projection and height, it comes in five sizes from 18″ x 18″ to 42″ x 42″, in thicknesses up to 6″. 

SKU: BKT-4030-4240-HP-4031-6VP-4241-6 Category: Tag:
Description

BKT-4030-4240-C.0 PVC Bracket 

Where traditional builders needed a bracket to look especially strong, they often used a solid triangle of timber with a straight, diagonal face, a form that reads as robust and dependable. These solid brackets remain a common sight on classic homes from the Coastal U.S. to the Caribbean. BKT-4030-4240-C.0 recreates that robust form in cellular PVC. It is decorative and, like most HB brackets, non-structural, while respecting the design and proportioning of a traditional wood bracket. 

A solid, straight-faced bracket 

BKT-4030-4240-C.0 is square in proportion and largely solid. Instead of a curved brace, its front edge runs in a straight diagonal from the outer end of the arm down to the foot, and a small triangular window is set into the body near the upper corner. The arm ends in a square tip with a single deep step on its underside. At the base, the front of the leg steps once and then curves outward in a concave sweep to a small squared toe, so the foot appears to flare against the wall. 

Its straight face, solid body and generous thickness give it a bold, sturdy appearance, well suited to heavier trim, large overhangs and porch roofs. For a curved-brace bracket with the same square proportions, compare BKT-4010-4220-l.1, or for a solid bracket with a curved front, see BKT-4003-4020-C.1. The full collection is shown on the HB PVC brackets page. 

Main body and end profiles 

Each HB bracket brings together a main body and two end profiles. The SKU BKT-4030-4240-HP-4031-6VP-4241-6 lists this bracket’s end profiles as HP-4031-6 at the arm and VP-4241-6 at the foot. With thousands of main bodies and end profiles in HB’s design tree, other end combinations can be discussed with the HB team. 

Material, installation and finishing 

BKT-4030-4240-C.0 is manufactured from cellular PVC using HB Elements’ patented process. It is installed with its included cleat and adhesive and needs very little preparation before painting. Paint is optional, though most HB brackets are painted to hide caulking and nail-hole filler and to blend in with the trim. As a decorative product, it should not be used to support structural loads. 

Ordering and sizing help 

For sizing help, email a PDF of your plans to info@hbelementsinc.com and call (954) 784-8216 to speak with an HB representative. You can also check the Brackets Spec Sheet, compare other HB PVC bracket designs, or watch installation guidance in the HB Elements video library. 

Additional information
thickness-projection-height3″ x 18″ x 18″, 4″ x 24″ x 24″, 5″ x 30″ x 30″, 6″ x 36″ x 36″, 6″ x 42″ x 42″
HPHP-4031-6
VPVP-4241-6