

RT-4611-3
RT-4611-3 is a PVC rafter tail that keeps its full depth to just short of mid-length, then cuts in a hooked notch, runs briefly level and rises in a short, steep S-shaped wave to a slim square tip. Holding the detail toward the end gives a solid tail with a lively finish. Nine standard sizes for HB soffit systems or standalone use.
RT-4611-3 PVC Rafter Tail
A short, steep wave at the end of a solid rafter gives a strong, characterful look, especially on larger homes. RT-4611-3 concentrates its notch and wave in the outer part of the tail. It is a decorative cellular PVC tail that adds the appearance of exposed rafter ends to an eave.
A compact wave on a solid tail
RT-4611-3 is plain and full height for a little under half its length. A hooked notch then cuts into the underside, a short level run follows, and the tail rises in a compact S-curve, hollow and then rounded, to a slim square tip.
It is the most compact of three related tails: RT-4610-4 places its notch about a third of the way out, and RT-4611-7 near the wall, each giving a longer wave. RT-4611-3 suits British West Indies, coastal and Mediterranean homes, and also works for gable lookouts or beneath a deck.
Construction details
RT-4611-3 comes off HB Elements’ patented production line in cellular PVC, hollow inside. It is a dress piece for the eave, not a support.
Use the included cleat and adhesive to fix it. A shallow overhang may need the tail trimmed first. It can go onto cellular PVC soffit, stucco, wood or cement fiber, and the surface takes paint without much prep.
Pairing with HB panels
The lively ends read well over a V-groove ceiling such as VGP-SL-5-08, and the tails cover the panel joints. HB fascia and frieze board complete the HB PVC soffit system; tails can also be purchased alone.
Ordering and sizing help
Prefer HB to pick the size? Forward your plans as a PDF to info@hbelementsinc.com or speak to them on (954) 784-8216. The Rafter Tails Spec Sheet holds the standard measurements, and the rafter tails page shows the alternatives.
| soffit-systems-variations | 3 1/2″ x 5 1/2″ x 24″, 3 1/2″ x 5 1/2″ x 30″, 3 1/2″ x 5 1/2″ x 36″, 4 1/2″ x 9 1/2″ x 24″, 4 1/2″ x 9 1/2″ x 30″, 4 1/2″ x 9 1/2″ x 36″, 4″ x 7 1/2″ x 24″, 4″ x 7 1/2″ x 30″, 4″ x 7 1/2″ x 36″ |
|---|
