

RT-4460-1
RT-4460-1 is a PVC rafter tail with a plain, full-depth body and a hollow cove at its end that stops short of the top, finishing in a small notch and a square tip. The pairing of a curved hollow and a squared edge gives the end its square-and-round character. Nine standard sizes for HB soffit systems or standalone use.
RT-4460-1 PVC Rafter Tail
Combining a curve and a square edge in one small detail is a classic way to give a rafter end character without adding length. RT-4460-1 does this at its tip, leaving the rest of the tail plain. It is a decorative cellular PVC tail that imitates exposed rafter ends, with no part in the roof structure.
A cove capped by a notch
RT-4460-1 has straight top and bottom edges for almost its full length. At the end, a concave cove curves upward from the underside, but rather than meeting the top corner it stops at a small notch, leaving a short square section at the very tip.
Its cove relatives finish differently: RT-4401-1 runs the hollow all the way to the top corner, and RT-4420-1 puts its notch beneath the cove rather than above it. RT-4460-1 suits Spanish Mediterranean, Low Country and coastal homes, and also works as a gable lookout or under a deck.
How it is made
RT-4460-1 is fabricated by HB Elements in hollow-core cellular PVC using its patented process. It is trim only.
Installation uses the supplied cleat and adhesive. The tail can be trimmed on site and fixed to cellular PVC soffit, stucco, wood or cement fiber, then painted with little prep.
With HB soffit panels
Over a V-groove ceiling such as VGP-5-08, the square-and-round ends add a neat accent at each rafter, and the tails cover the seams between panels. HB fascia and frieze board complete the soffit system; all parts are sold individually too.
Ordering and sizing help
Send HB your plans as a PDF at info@hbelementsinc.com or call (954) 784-8216 to choose sizes. The Rafter Tails Spec Sheet lists standard dimensions; the rafter tails collection shows more designs.
| soffit-systems-variations | 3 1/2″ x 5 1/2″ x 24″, 3 1/2″ x 5 1/2″ x 30″, 3 1/2″ x 5 1/2″ x 36″, 4 1/2″ x 9 1/2″ x 24″, 4 1/2″ x 9 1/2″ x 30″, 4 1/2″ x 9 1/2″ x 36″, 4″ x 7 1/2″ x 24″, 4″ x 7 1/2″ x 30″, 4″ x 7 1/2″ x 36″ |
|---|
