

VGP-5-08
VGP-5-08 is an 8-foot V-groove soffit panel from HB Elements: 1/2″ cellular PVC with beveled grooves every 5″ that recreate traditional V-joint tongue-and-groove soffit. Paired with HB rafter tails, it gives eaves a timber-framed look. Seven widths, 12″ to 48″.
VGP-5-08 V-Groove PVC Soffit Panel (8 ft)
VGP-5-08 brings the classic beadboard-style rhythm of V-joint tongue and groove to soffits and porch ceilings in a single PVC sheet. Instead of installing dozens of narrow boards, one panel delivers the same pattern. It is HB’s V-groove panel in its shortest, 8-foot length.
The V-joint look
Each groove on VGP-5-08 is beveled to a V, the way the meeting edges of traditional tongue-and-groove boards are chamfered. Grooves run the length of the sheet at 5″ on center, giving the board width of 1×6 decking. The face between them is smooth, not grain-embossed, so it does not mimic a specific species. Combined with HB rafter tails, the panel recreates the look of a timber-framed roof with exposed decking.
For square, flat-bottomed joints in the same length, choose NJP-5-08; for no grooves at all, SMP-5-08. The shiplap version of this panel is VGP-SL-5-08.
Suited to smaller spaces
The 8-foot length is manageable overhead for one or two installers, making it a good fit for entry porches, breezeways, small covered patios and dormer or bay soffits. HB also notes V-groove panels work as wall cladding, installed vertically or horizontally on accent walls.
For longer eaves with fewer joints, see VGP-5-10 and VGP-5-12.
Material and finishing
VGP-5-08 is cellular PVC, a material HB describes as impervious to moisture, mildew and rot and free of the splitting and checking that affect wood. It goes up with typical woodworking tools, and the long joint needs no caulking. With HB PVC rafter tails covering the panel seams, few fasteners show and painting needs little prep; a factory woodgrain finish is an option. Fascia and frieze board round out the HB soffit system.
Ordering and sizing help
Email PDF plans to info@hbelementsinc.com and call (954) 784-8216 to confirm widths and panel counts with HB. Specifications are in the Soffit Panels Spec Sheet.
| soffit-systems-variations | V-groove panel – 1/2″ x 12″ x 8′, V-groove panel – 1/2″ x 18″ x 8′, V-groove panel – 1/2″ x 24″ x 8′, V-groove panel – 1/2″ x 30″ x 8′, V-groove panel – 1/2″ x 36″ x 8′, V-groove panel – 1/2″ x 42″ x 8′, V-groove panel – 1/2″ x 48″ x 8′ |
|---|
