RT-4402-4

RT-4402-4 pairs a small square notch, set about a third of the way along its underside, with a bowed curve that climbs to a square tip. The notch gives the curve a crisp starting point and adds a fine line of shadow. This PVC rafter tail is offered in nine standard sizes for HB’s soffit system or independent use. 

SKU: RT-4402-4 Category: Tag:
Description

RT-4402-4 PVC Rafter Tail 

A small notch at the start of a curve works like a joint line, making the shape look deliberately cut rather than simply rounded. RT-4402-4 places one ahead of a broad, bowed sweep. Like every HB tail, it is cellular PVC trim that suggests exposed rafters rather than forming part of the roof. 

A notch and a bowed curve 

RT-4402-4 runs at full depth with a straight top for about a third of its length. A small square notch then marks the underside, and from it a bowed curve rises, climbing quickly at first and easing as it approaches the square tip. 

It shares its curve with RT-4401-5, which starts with a crisp angled break instead of a notch. For a notch followed by a concave scoop that steepens toward the tip, see RT-4202-3. RT-4402-4 fits Key West, coastal and Mediterranean elevations, and it doubles as a lookout at the gable or a detail under a deck. 

Material and fitting 

RT-4402-4 is made from cellular PVC with a hollow core, using HB Elements’ patented fabrication system. It is non-structural trim. 

Each tail comes with a cleat and adhesive. It can be cut to length on site and installed over cellular PVC soffit, stucco, wood or cement fiber, then painted with minimal prep. 

Completing the soffit 

Fitted over a shiplap V-groove ceiling (VGP-SL-5-08, for example), the tails cover panel joints and add rhythm to the eave. Fascia and frieze board from HB finish the soffit ceilings system, or the tails can be ordered alone. 

Ordering and sizing help 

Your plans, emailed as a PDF to info@hbelementsinc.com, let HB recommend sizes; follow up on (954) 784-8216. The Rafter Tails Spec Sheet has standard dimensions; the HB rafter tails page shows more designs.

Additional information
soffit-systems-variations3 1/2″ x 5 1/2″ x 24″, 3 1/2″ x 5 1/2″ x 30″, 3 1/2″ x 5 1/2″ x 36″, 4 1/2″ x 9 1/2″ x 24″, 4 1/2″ x 9 1/2″ x 30″, 4 1/2″ x 9 1/2″ x 36″, 4″ x 7 1/2″ x 24″, 4″ x 7 1/2″ x 30″, 4″ x 7 1/2″ x 36″