BKT-3407-5.5-8

BKT-3407-5.5-8 is a tall, mostly solid decorative bracket in cellular PVC, with a long concave curve down its front edge, a small triangular cut-out near the top and stepped details at the arm tip and foot. Its height is twice its projection, and it is available in five sizes from 16″ x 32″ to 36″ x 72″ (projection x height), 3″ to 6″ thick.

SKU: BKT-3407-5.5-8HP-4010-7VP-4010-8 Category: Tag:
Description

BKT-3407-5.5-8 PVC Bracket 

Some of the most striking traditional brackets were cut from a single deep plank, shaped along the front edge rather than built up from separate pieces. Their solid, sculpted outlines are still a familiar sight on classic homes from the Coastal U.S. to the Caribbean. BKT-3407-5.5-8 reproduces that solid, carved look in cellular PVC. It is a decorative, non-structural piece, like most HB brackets, made to follow the design and proportions of a traditional wood bracket. 

Solid form, sweeping curve 

BKT-3407-5.5-8 reads as one solid piece. Its front edge runs in a long, concave curve from the end of the top arm down to the foot, giving the bracket a gently waisted, flowing silhouette. Only a small triangular cut-out near the top corner breaks the solid face. At the outer end, the underside of the arm has a single small step and then an angled cut to a square tip, while the lower front edge steps in twice before tapering to the foot. 

Because it is tall and largely solid, this bracket brings visual weight to tall walls, columns, piers and two-story overhangs. For a lighter, open triangular design with the same 2 to 1 proportions, compare BKT-3403-5-8M, or browse the full HB PVC brackets range for other styles. 

Main body and end profiles 

HB brackets are put together from a main body and two end profiles. The SKU BKT-3407-5.5-8HP-4010-7VP-4010-8 identifies the BKT-3407-5.5-8 main body with end profiles HP-4010-7 and VP-4010-8. HB’s design tree includes thousands of main bodies and end profiles, so the HB team can advise on alternative end details for this bracket. 

Material, installation and finishing 

This bracket is made from cellular PVC using HB Elements’ patented manufacturing process. It is installed with the included cleat and adhesive and needs very little preparation before painting. While painting is optional, most HB brackets are painted to cover caulking and nail-hole filler and to blend with the trim. BKT-3407-5.5-8 is a decorative element and is not intended to support structural loads.

Ordering and sizing help 

To confirm the right size, send a PDF of your plans to info@hbelementsinc.com and call (954) 784-8216 to go through them with an HB representative. HB’s Brackets Spec Sheet sets out the standard size chart, the PVC brackets page shows further designs, and installation videos are in the HB Elements video library. 

Additional information
thickness-projection-height3″ x 16″ x 32″, 4″ x 18″ x 36″, 5″ x 24″ x 48″, 5″ x 30″ x 60″, 6″ x 36″ x 72″
HPHP-4010-7
VPVP-4010-8