











BKT-3412-4-7-2
BKT-3412-4-7-2 is a tall, decorative cellular PVC bracket with a single curved brace and triangular opening, a rounded underside at the arm tip and a foot shaped with small steps and a concave cove. It is twice as tall as its projection and is offered in five sizes from 16″ x 32″ to 36″ x 72″ (projection x height).
BKT-3412-4-7-2 PVC Bracket
On traditional houses, the ends of a bracket were where the woodworker’s skill showed most, with curves and steps cut into the tip and the foot to catch light and shadow. That craftsmanship helps explain why brackets remain such a recognizable part of classic homes from the Coastal U.S. to the Caribbean. BKT-3412-4-7-2 captures those shaped ends in cellular PVC. Like most HB brackets it is non-structural, yet it is designed to the same proportions as a traditional wood bracket.
Shaped at the tip and the foot
This bracket shares its main body with BKT-3412-4-7-1: a short top arm, a long wall leg, and a single curved brace that encloses a triangular opening below the arm. What sets BKT-3412-4-7-2 apart is its ends. The arm finishes with a smooth, rounded underside that curves up to the tip, and the foot is cut with a series of small steps followed by a shallow concave cove that ends in a squared toe.
With softly curved ends at both the top and the base, it has a more ornamental character than its sibling, BKT-3412-4-7-1, which has a square arm tip and a rounded foot. It works well on tall walls, posts, columns and porch fronts where the bracket will be seen up close. For more styles, browse the HB PVC brackets range.
Main body and end profiles
HB brackets are specified as a main body plus two end profiles. The SKU BKT-3412-4-7-2-HP-4201-5-VP-4483-6 combines the BKT-3412-4-7 main body with end profiles HP-4201-5 and VP-4483-6. HB’s design tree includes thousands of main bodies and end profiles, and the HB team can recommend other end combinations for your project.
Material, installation and finishing
The bracket is made from cellular PVC using HB Elements’ patented manufacturing process. Installation uses the included cleat and adhesive, and very little preparation is needed before painting. Paint is not essential, but most HB brackets are painted so that caulking and nail-hole filler are concealed and the bracket matches the trim. BKT-3412-4-7-2 is decorative and is not designed to support structural loads.
Ordering and sizing help
For help with sizing, email a PDF of your plans to info@hbelementsinc.com and then call an HB representative on (954) 784-8216. You can also download the Brackets Spec Sheet, compare other HB PVC bracket designs, or watch installation videos in the HB Elements video library.
| thickness-projection-height | 3″ x 16″ x 32″, 3″ x 18″ x 36″, 4″ x 24″ x 48″, 5″ x 30″ x 60″, 6″ x 36″ x 72″ |
|---|---|
| HP | HP-4201-5 |
| VP | VP-4483-6 |
