

RT-4601-2
RT-4601-2 is a PVC rafter tail with a long, plain body that finishes in a smooth S-shaped wave, curving down and then up to a slim square tip. Keeping the wave at the end gives a calm tail with a graceful, flowing finish. Nine standard sizes for HB soffit systems or standalone use.
RT-4601-2 PVC Rafter Tail
A wave at the end of a rafter tail softens the eave without adding fuss along its length. RT-4601-2 keeps its body plain and saves a single reverse curve for the tip. It is a decorative cellular PVC tail that gives eaves the look of exposed rafter ends while the true framing stays hidden.
A plain body with a wave at the end
RT-4601-2 runs straight and full height for a little over half its length. Toward the end the underside flows into a smooth S-curve, hollow first and then rounding over, that rises to a slim square tip under the straight top edge. There are no steps or notches along the way.
For a wave introduced by a step and finished with a notch, see RT-4280-5. RT-4670-7 also uses an S-curve, but starts it from a small step. RT-4601-2 suits coastal, Key West and West Indies homes where a soft, flowing eave line is wanted, and also works at gable ends or below a deck.
Material and fitting
HB Elements makes RT-4601-2 from cellular PVC with a hollow core on its patented fabrication system. It is non-structural trim.
Each tail comes with a cleat and adhesive. Trim it to length on site if required and fix it to cellular PVC soffit, stucco, wood or cement fiber; it takes paint after light prep.
Pairing with soffit panels
The flowing ends look at home over a smooth ceiling such as SMP-5-08, with the tails masking the seams between panels. HB fascia and frieze board complete the soffit ceilings range; tails are sold separately too.
Ordering and sizing help
Email a PDF of the plans to info@hbelementsinc.com or call HB on (954) 784-8216 to agree sizes. Standard measurements are in the Rafter Tails Spec Sheet; the HB rafter tails page has every other profile.
| soffit-systems-variations | 3 1/2″ x 5 1/2″ x 24″, 3 1/2″ x 5 1/2″ x 30″, 3 1/2″ x 5 1/2″ x 36″, 4 1/2″ x 9 1/2″ x 24″, 4 1/2″ x 9 1/2″ x 30″, 4 1/2″ x 9 1/2″ x 36″, 4″ x 7 1/2″ x 24″, 4″ x 7 1/2″ x 30″, 4″ x 7 1/2″ x 36″ |
|---|
