RT-4700-5

RT-4700-5 is a PVC rafter tail with a long S-curve that begins about a third of the way out, rises through the middle and levels off into a full square end. There are no steps or notches. Nine standard sizes for HB soffit systems or standalone use. 

SKU: RT-47100-5 Category: Tags: ,
Description

RT-4700-5 PVC Rafter Tail 

RT-4700-5 relies on one clean curve and nothing else. The wave sits in the middle of the tail and settles into a level stretch before the end, so the tip keeps more of its depth than slim-ended designs. It is a decorative cellular PVC tail that gives eaves the look of shaped, exposed rafters. 

A mid-length wave with a full end 

The underside of RT-4700-5 is straight for about the first third. It then sweeps upward in a smooth S-curve across the middle of the tail and flattens into a short level run, ending at a square tip that keeps a generous depth under the straight top edge. No steps or notches interrupt the line. 

Its sibling RT-4701-7 scoops deeper and rolls back down into a heavier end. RT-4601-7 also uses a cut-free wave but tapers to a slim tip. The clean, uninterrupted line suits contemporary coastal, transitional and modern farmhouse elevations. 

Construction notes 

HB Elements makes RT-4700-5 from hollow-core cellular PVC on its patented process. The tail is ornamental only and should never support framing. 

Each one comes with a cleat and adhesive. Saw it shorter if the eave needs less projection and mount it to cellular PVC soffit, stucco, wood or cement fiber; a quick clean prepares it for paint. 

With HB soffit ceilings 

Under a V-groove ceiling like VGP-5-12, the smooth curves soften the lined background and the tails cover panel seams. Fascia and frieze board are part of HB’s soffit ceilings offering; tails can also be ordered alone. 

Getting help with sizing 

Email elevations or sections (PDF) to info@hbelementsinc.com and HB will propose sizes, or phone (954) 784-8216. Standard dimensions are on the Rafter Tails Spec Sheet, and other cut-free designs are on the HB rafter tails page.