

RT-4483-5
RT-4483-5 is a PVC rafter tail with a slanted step about a third of the way along, a short flat run, then a bowed curve that rises to a notch beneath the square tip. The brief pause between step and curve gives the profile a measured, layered look. Nine standard sizes for HB soffit systems or standalone use.
RT-4483-5 PVC Rafter Tail
Inserting a short flat between a step and a curve slows the profile down, so each element reads on its own. RT-4483-5 uses that pause to give its underside a carefully layered look. It is a decorative cellular PVC tail that suggests exposed rafter ends while the roof framing stays out of sight.
Step, pause, curve
RT-4483-5 is full height for about a third of its length. A slanted step then lifts the underside, a short flat run follows, and the underside turns up into a bowed curve that rises across the rest of the tail before stopping at a notch and square tip.
The flat run is what separates it from RT-4470-6, whose curve starts straight from a deeper step. RT-4483-8 uses the same step-flat-curve sequence set closer to the wall. RT-4483-5 suits coastal, Key West and Florida Vernacular homes, and can also serve as a gable lookout or a detail beneath a deck.
Construction details
RT-4483-5 is made from cellular PVC around a hollow core on HB Elements’ patented fabrication system. It is ornamental only.
Every tail is supplied with a cleat and adhesive. Shorten it on site if necessary and fix it to cellular PVC soffit, stucco, wood or cement fiber; it takes paint after light prep.
Pairing with HB panels
Over a shiplap nickel joint ceiling such as NJP-SL-5-12, the layered tails add rhythm and conceal joints between panels. HB fascia and frieze board finish the PVC soffit system, and the tails can be bought separately.
Ordering and sizing help
HB will recommend sizes from your plans; send them as a PDF to info@hbelementsinc.com or call (954) 784-8216. Standard dimensions are listed in the Rafter Tails Spec Sheet; compare other designs on the rafter tails page.
| soffit-systems-variations | 3 1/2″ x 5 1/2″ x 24″, 3 1/2″ x 5 1/2″ x 30″, 3 1/2″ x 5 1/2″ x 36″, 4 1/2″ x 9 1/2″ x 24″, 4 1/2″ x 9 1/2″ x 30″, 4 1/2″ x 9 1/2″ x 36″, 4″ x 7 1/2″ x 24″, 4″ x 7 1/2″ x 30″, 4″ x 7 1/2″ x 36″ |
|---|
