BKT-3412-4-7-1

BKT-3412-4-7-1 is a tall, slender decorative bracket in cellular PVC with a single curved brace, a triangular opening under the arm, a plain square arm tip and a stepped, rounded foot. Its height is twice its projection, and it comes in five sizes from 16″ x 32″ to 36″ x 72″ (projection x height).

SKU: BKT-3412-4-7-1-HP-4002-6-VP-4204-8 Category: Tag:
Description

BKT-3412-4-7-1 PVC Bracket 

Tall, narrow brackets were a common way for traditional builders to support overhangs on high walls and posts, where a deep, squat bracket would have looked out of scale. Their elongated outlines are still part of the charm of classic homes from the Coastal U.S. to the Caribbean. BKT-3412-4-7-1 offers that elongated look in cellular PVC. It is a decorative bracket, non-structural like most HB brackets, made to the design and proportioning of a traditional wood bracket. 

A slender, single-brace design 

BKT-3412-4-7-1 keeps the structure simple: a short top arm, a long wall leg and one gracefully curved brace that runs from just inside the arm tip to the lower part of the leg, leaving a triangular opening beneath the arm. The tip of the arm is a plain, square end with a single small step where the brace meets it. The decorative emphasis sits at the base, where the leg steps in twice and then finishes in a smooth, rounded foot. 

With its clean lines and long proportions, it suits tall walls, porch posts, columns and narrow spaces between windows. If you prefer a crossed-brace design with the same 2 to 1 proportions, see BKT-3412-4-3.5M; for a straight-braced triangle, see BKT-3403-5-8M. The complete collection is on the HB PVC brackets page. 

Main body and end profiles 

Every HB bracket is made from a main body and two end profiles. According to its SKU, BKT-3412-4-7-1-HP-4002-6-VP-4204-8, this bracket uses the BKT-3412-4-7 main body with end profiles HP-4002-6 and VP-4204-8. HB’s design tree offers thousands of main bodies and end profiles, so the HB team can discuss alternative ends with you. 

Material, installation and finishing 

BKT-3412-4-7-1 is fabricated from cellular PVC with HB Elements’ patented manufacturing process. It is installed with the cleat and adhesive that come with it and needs little preparation before painting. Paint is optional, but most HB brackets are painted to hide caulking and nail-hole filler and to match the house trim. The bracket is ornamental and should not be used as a structural support.

Ordering and sizing help 

Send your plans as a PDF to info@hbelementsinc.com and call (954) 784-8216 to confirm size and end details with an HB representative. The Brackets Spec Sheet lists HB’s standard sizes, more designs are on the PVC brackets page, and the HB Elements video library shows how brackets are installed. 

Additional information
thickness-projection-height3″ x 16″ x 32″, 3″ x 18″ x 36″, 4″ x 24″ x 48″, 5″ x 30″ x 60″, 6″ x 36″ x 72″