











BKT-3221-5.5-7-4
BKT-3221-5.5-7-4 is a decorative cellular PVC bracket with a deep arm that curves down into the wall leg, an open back, a double-stepped arm tip and a foot that flares out in a concave cove. It is 1.5 times taller than its projection and is available in five sizes from 16″ x 24″ to 42″ x 63″ (projection x height).
BKT-3221-5.5-7-4 PVC Bracket
Traditional carpenters often gave the base of a bracket as much attention as its top, shaping the foot so the support seemed to grow out of the wall. Details like these are part of the appeal of the classic homes found from the Coastal U.S. to the Caribbean. BKT-3221-5.5-7-4 brings that idea to a cellular PVC bracket. As with most HB brackets it is non-structural, but it stays true to the design and proportions of a traditional wood bracket.
Design highlights
BKT-3221-5.5-7-4 uses the deep-armed BKT-3221-5.5-7 main body: a heavy top arm that bends down in one broad curve into the leg, with an open back where the wall side is cut away below the arm. At the outer end, the underside of the arm steps up twice toward a square tip. The most distinctive feature is the foot: below a single small step, the leg curves outward in a concave cove and finishes with a small squared toe, so the base appears to flare out against the wall.
That flared foot balances the weight of the deep arm and gives the bracket a grounded, finished look, suiting entrances, porches and wide eaves where the base of the bracket is in clear view. To compare the other end options on this main body, see BKT-3221-5.5-7-3, which has a square-cut tip and tapered foot, or browse every design in the HB PVC brackets range.
Main body and end profiles
An HB bracket is defined by its main body and its two end profiles. Here, the SKU BKT-3221-5.5-7-4-HP-4061-5-VP4461-7 brings together the BKT-3221-5.5-7 main body and the HP-4061-5 and VP4461-7 end profiles. Since HB’s design tree includes thousands of main bodies and end profiles, other end combinations can be discussed with the HB team.
Material, installation and finishing
BKT-3221-5.5-7-4 is made from cellular PVC with HB Elements’ patented manufacturing process. It installs with the cleat and adhesive provided and requires very little preparation for paint. Painting is a choice rather than a requirement, though most HB brackets are painted so caulking and nail-hole filler are hidden and the bracket matches the trim. Being decorative, it should not be relied on for structural support.
Ordering and sizing help
For sizing advice, email a PDF of your project plans to info@hbelementsinc.com and then speak to an HB representative on (954) 784-8216. The Brackets Spec Sheet lists HB’s standard bracket sizes, the PVC brackets page shows further designs, and the HB Elements video library explains installation.
| thickness-projection-height | 3″ x 16″ x 24″, 4″ x 24″ x 36″, 5″ x 30″ x 45″, 6″ x 36″ x 54″, 6″ x 42″ x 63″ |
|---|---|
| HP | HP-4061-5 |
| VP | VP-4461-7 |
