BKT-3221-5.5-7-5

BKT-3221-5.5-7-5 is a decorative cellular PVC bracket in a deep-armed, open-back sweep, with a scooped, coved underside at the arm tip and a simple single-step, tapered foot. It is 1.5 times as tall as it projects and comes in five sizes, from 16″ x 24″ to 42″ x 63″ (projection x height). 

SKU: BKT-3221-5.5-7-5-HP-4261-5-VP-4002-8 Category: Tag:
Description

BKT-3221-5.5-7-5 PVC Bracket 

Where a bracket meets the underside of an overhang, traditional woodworkers often carved a soft curve into the end of the arm, a detail that catches light and shadow along the eaves. Brackets finished this way remain closely linked with the classic homes of the Coastal U.S. and the Caribbean. BKT-3221-5.5-7-5 brings that curved detail to cellular PVC. Like most HB brackets, it is a non-structural, decorative piece that respects the design and proportioning of traditional wood brackets. 

Coved tip, clean base 

This bracket is built on the BKT-3221-5.5-7 main body, with a deep top arm that runs down in one wide arc into the wall leg and an open back below the arm. Toward the outer end, the underside of the arm steps once and then rises in a scooped, concave cove to a small squared tip. The base is deliberately plain by comparison: a single small step on the front of the leg, followed by a long, straight taper down to the foot. 

Putting the decorative emphasis on the arm tip, where it is seen against the soffit, keeps the lower part of the bracket uncluttered. That balance works well under eaves, porch roofs and gable overhangs viewed from below. Other end treatments on this main body include BKT-3221-5.5-7-3 with a square-cut tip and BKT-3221-5.5-7-4 with a flared foot. You can see every option in the HB PVC brackets collection. 

Main body and end profiles 

HB specifies each bracket by its main body and two end profiles. The SKU BKT-3221-5.5-7-5-HP-4261-5-VP-4002-8 joins the BKT-3221-5.5-7 main body with the HP-4261-5 and VP-4002-8 end profiles. With thousands of main bodies and end profiles in HB’s design tree, the HB team can advise on alternative ends. 

Material, installation and finishing 

The bracket is formed from cellular PVC through HB Elements’ patented manufacturing process. It is installed with its included cleat and adhesive, and minimal preparation is needed before painting. You may leave it unpainted, but most HB brackets are painted to cover caulking and nail-hole filler and to align with the trim color. It is an ornamental product and should not be used to carry structural loads.

Ordering and sizing help 

Share a PDF of your plans by email at info@hbelementsinc.com and call (954) 784-8216 for help from an HB representative on size and end details. For reference, download the Brackets Spec Sheet, browse other HB PVC bracket designs, or watch installation videos in the HB Elements video library.

Additional information
thickness-projection-height3″ x 16″ x 24″, 4″ x 24″ x 36″, 5″ x 30″ x 45″, 6″ x 36″ x 54″, 6″ x 42″ x 63″
HPHP-4261-5
VPVP-4002-8