

SMP-5-10
SMP-5-10 is a 10-foot smooth soffit panel from HB Elements, made in 1/2″ cellular PVC with a flat face and no grooves. The mid-length sheet suits most residential eaves and porch ceilings that call for a clean, modern finish. Seven widths, 12″ to 48″
SMP-5-10 Smooth PVC Soffit Panel (10 ft)
SMP-5-10 combines HB’s plainest face with its middle length. The 10-foot sheet covers typical eave and porch spans with fewer butt joints than an 8-foot panel, while staying lighter to lift than a 12-foot one. With no grooves on the surface, the ceiling reads as one calm, even plane.
Clean and understated
SMP-5-10 has a level, ungrooved face from edge to edge. That makes it a good partner for homes where the architecture should carry the detail, such as modern, coastal contemporary or Prairie-style designs, or where the soffit should simply disappear above a porch. HB positions its smooth panel for jobs that want less detailing than its V-groove and nickel joint styles provide.
For grooved alternatives in the same length, see VGP-5-10 (beveled V-joint) and NJP-5-10 (square nickel joint).
Laying out 10-foot sheets
Because a smooth ceiling has no lines to hide a seam, plan where the end joints fall before cutting. Ten-foot sheets break evenly into 20- and 30-foot runs, and HB rafter tails can be placed over panel seams. The long edge of HB sheets does not need caulking.
Shorter lengths are easier on tight porches: SMP-5-08. For the fewest joints on long eaves, choose SMP-5-12.
Why PVC for a smooth soffit
A flat surface shows every flaw, so the material matters. Cellular PVC resists moisture, mildew and rot, will not warp or crack like exposed wood, and HB says it holds paint about five times longer. It is cut with standard woodworking tools, and a factory-applied woodgrain finish is available. Use it with HB rafter tails, fascia and frieze board as part of the HB soffit ceilings system, or separately, including as wall cladding.
Ordering and sizing help
Send your plans as a PDF to info@hbelementsinc.com, then call (954) 784-8216 to go through widths and sheet counts for each run. Full panel details are in the Soffit Panels Spec Sheet.
| soffit-systems-variations | Smooth panel – 1/2″ x 12″ x 10′, Smooth panel – 1/2″ x 18″ x 10′, Smooth panel – 1/2″ x 24″ x 10′, Smooth panel – 1/2″ x 30″ x 10′, Smooth panel – 1/2″ x 36″ x 10′, Smooth panel – 1/2″ x 42″ x 10′, Smooth panel – 1/2″ x 48″ x 10′ |
|---|
