SMP-5-12

SMP-5-12 is HB Elements’ longest smooth soffit panel: a 12-foot, 1/2″ cellular PVC sheet with no grooves. Long sheets mean fewer end joints, which matters most on a plain ceiling where seams are easy to spot. Seven widths from 12″ to 48″. 

SKU: SMP-5-12 Category:
Description

SMP-5-12 Smooth PVC Soffit Panel (12 ft) 

On a smooth soffit, every end joint is visible, so length counts. SMP-5-12 is the 12-foot version of HB’s plain-faced panel, letting long eaves, garage overhangs and deep porch ceilings run further between seams. The face is flat and ungrooved for a clean, modern finish. 

Fewer seams on a flat ceiling 

Grooved panels can hide a butt joint in a board line; a smooth panel cannot. The extra length of SMP-5-12 reduces the number of joints along a run, helping the soffit read as one continuous surface on contemporary, modern farmhouse and coastal homes. HB recommends its smooth panel wherever a simple look with less detail is preferred. 

If you would rather have the look of boards, the 12-foot grooved options are VGP-5-12 and NJP-5-12. 

Handling the longest length 

Twelve-foot sheets are best installed by two people on long, straight runs such as wraparound porches, garage eaves and wide lanai ceilings. Where joints are unavoidable, place HB rafter tails over them so the seam is covered. 

For shorter spans or tighter access, choose SMP-5-10 or SMP-5-08. 

Low-upkeep cellular PVC 

Like HB’s other panels, SMP-5-12 is made from cellular PVC, which HB says does not expand and contract, will not split, check or rot, and resists moisture and mildew. Paint adheres well and lasts longer than on wood, and HB sheets are fully usable with minimal waste. A factory woodgrain finish is offered. Combine the panel with HB rafter tails and trim for a complete PVC soffit ceiling, or use it alone. 

Ordering and sizing help 

Share a PDF of your plans with info@hbelementsinc.com and call (954) 784-8216 to confirm widths, lengths and quantities. Panel dimensions are listed on the Soffit Panels Spec Sheet.

Additional information
soffit-systems-variationsSmooth panel – 1/2″ x 12″ x 12′, Smooth panel – 1/2″ x 18″ x 12′, Smooth panel – 1/2″ x 24″ x 12′, Smooth panel – 1/2″ x 30″ x 12′, Smooth panel – 1/2″ x 36″ x 12′, Smooth panel – 1/2″ x 42″ x 12′, Smooth panel – 1/2″ x 48″ x 12′