

RT-4683-2
RT-4683-2 is a PVC rafter tail with a long plain body, a slanted step past the midpoint, a short S-shaped wave and a deep notch under the square tip. Nine standard sizes, for HB soffit systems or standalone eave work.
RT-4683-2 PVC Rafter Tail
A deep notch at the tip gives RT-4683-2 its firm finish. Before it, a slanted step and a brief wave prepare the end, while the rest of the tail stays straight. This cellular PVC tail recreates exposed rafter ends as decoration, with the framing hidden behind the soffit.
A deep-notched end
RT-4683-2 runs straight from the wall to beyond its midpoint, where a slanted step drops the underside. A short S-shaped wave rises from there to a flat landing, and a deep notch is cut under the square tip below the straight top edge.
The closest match is RT-4680-2, whose notch is shallower and narrower. RT-4670-3 has a similar arrangement with its step placed nearer the middle. The bold end detail reads well from the street, which suits two-story coastal and Mediterranean houses and gable overhangs.
Construction
RT-4683-2 is made from cellular PVC, hollow inside, using HB Elements’ patented fabrication. Its purpose is appearance; it carries no structural load.
The tail arrives with a cleat and adhesive for mounting. Shorten it on site if needed and fix it to PVC soffit, stucco, wood or cement fiber; minimal prep is required before paint.
Using it with HB panels
A smooth soffit such as SMP-5-08 keeps the background simple so the deep notch casts a clear shadow, and the tails cover panel joints. HB fascia and frieze board are part of the soffit ceilings product line, and tails are also sold individually.
Sizing assistance
Send elevation or section drawings (PDF) to info@hbelementsinc.com for a proposal, or call (954) 784-8216. Refer to the Rafter Tails Spec Sheet for standard dimensions and the HB rafter tails page for related profiles.
